My flight out of New Orleans wasn’t leaving for several hours. Just a few miles from the airport, was the antebellum Destrehan plantation overlooking the mighty Mississippi River. So I had plenty of time to take the guided tour. Walking through the mansion, the marble mantles and sides of some of the fireplaces caught my […] Read more »
What Causes Ink Adhesion Problems?
The $64 question is: what causes ink adhesion problems when screen printing polycarbonate film? While some have suggested moisture absorption as the culprit, the most likely candidate is exposure to UV light and oxygen. As the polycarbonate absorbs UV light, it excites the photons of the atoms, which in turn creates free radicals. Free radicals […] Read more »
Screen Printing on Polycarbonate
Painting is not the only solution for decorating plastic signfaces. For high-volume jobs, screen printing is an economical solution. In selecting an ink system, ask your screen print supply distributor for a recommendation. The technical bulletin will give you printing recommendations. The type of mesh, squeegee, stencil and thinners are a few of the variables […] Read more »
Painting Polycarbonate Sheet
The extraordinary clarity of polycarbonate makes it an excellent substrate for backlit signs. Generally, but not always, the sheet is sprayed on its second surface. Because the paint faces the inside of the sign cabinet, it is protected from the elements. Any painting done on the first surface of the sign face must be clear […] Read more »
Vinyl Application to Polycarbonate Sheet
Even if polycarbonate sheet was covered with a surface protection film, you should always consider the surface contaminated. That means that you must clean the sign face before applying the graphics. Before you prep the substrate with a solvent or detergent, carefully read the manufacturer’s instructions. For most plastic-sheet applications, the most reliable cleaning method […] Read more »
Hygroscopic Plastics
Outgassing: Problems Arising Out Of Thin Air Some plastics can absorb moisture from the air. These materials fall into the category called “hygroscopic plastics”. The best known product in this group is polycarbonate. It’s not, however, the only hygroscopic plastic. Nylon and polyester can also absorb water vapor. Read more »
Mottling and what to do about it
Have you ever occasionally noticed a dull, hazy or blotchy appearance on the surface of some vinyl films or overlaminates? This is a condition called mottling. There’s no reason to get too excited. While this hazy appearance certainly detracts from the aesthetic appeal of your graphics, mottling can easily be remedied, which I will explain […] Read more »
The Importance of Fire Inspections
A Proactive Approach to Reducing the Risk of Fire The old saying, “forewarned is forearmed”, should remind us that conducting regular fire inspections is the best way to keep the incidence of fires low. By identifying fire hazards in your shop, you can correct them before they cause a fire. Read more »
Surface Preparation of Unpainted Aluminum
How to Remove Oxidation on Aluminum Many years ago, some of the tankers and trailers had unpainted aluminum skins. Direct application of pressure-sensitive vinyl graphics to these surfaces often resulted in adhesion failures. The cause of adhesion problems on aluminum is usually oxidation on the surface of the metal. Whether you are applying an emblem […] Read more »
The New American Sign Museum
A Dream Comes True With the opening of the new American Sign Museum on June 23 this year, museum founder Tod Swormstedt achieved one of his dreams. As I walked past the brightly lit exhibits, I thought about what Napoleon Hill, author of Think and Grow Rich, had said: what a man can conceive of and […] Read more »
