Screen Printing on Polycarbonate

Painting is not the only solution for decorating plastic signfaces. For high-volume  jobs, screen printing is an economical solution. In selecting an ink system, ask your screen print supply distributor for a recommendation. The technical bulletin  will give you printing recommendations. The type of mesh, squeegee, stencil and thinners are a few of the variables […] Read more »

Painting Polycarbonate Sheet

The extraordinary clarity of polycarbonate makes it an excellent substrate for backlit signs.  Generally, but not always, the sheet is sprayed on its second surface. Because the paint faces the inside of the sign cabinet, it is protected from the elements. Any painting done on the first surface of the sign face must be clear […] Read more »

Vinyl Application to Polycarbonate Sheet

Even if polycarbonate sheet was covered with a surface protection film, you should always consider the surface contaminated. That means that you must clean the sign face before applying the graphics. Before you prep the substrate with a solvent or detergent, carefully read the manufacturer’s instructions. For most plastic-sheet applications, the most reliable cleaning method […] Read more »

Hygroscopic Plastics

Outgassing: Problems Arising Out Of Thin Air Some plastics can absorb moisture from the air.  These materials fall into the category called “hygroscopic plastics”.  The best known product in this group is polycarbonate. It’s not, however, the only hygroscopic plastic. Nylon and polyester can also absorb water vapor. Read more »

Mottling and what to do about it

Have you ever occasionally noticed a dull, hazy or blotchy appearance on the surface of some vinyl films or overlaminates? This is a condition called mottling.  There’s no reason to get too excited. While this hazy appearance certainly detracts from the aesthetic appeal of your graphics, mottling can easily be remedied, which I will explain […] Read more »

Surface Preparation of Unpainted Aluminum

How to Remove Oxidation on Aluminum Many years ago, some of the tankers and trailers had unpainted aluminum skins.  Direct application of pressure-sensitive vinyl graphics to these surfaces often resulted in adhesion failures. The cause of adhesion problems on aluminum is usually oxidation on the surface of the metal. Whether you are applying an emblem […] Read more »

Moving and Wrapping Around the World

Are wrapping techniques any different in London than they are in Los Angeles? Find out from one of the United Kingdom’s top vehicle wrapping companies. From the U.S. to the U.K. sign makers are making more than signs wrapping vehicles. They are making profits. Find out how to turn a vehicles into a rolling advertisements. […] Read more »

The New American Sign Museum

A Dream Comes True With the opening of the new American Sign Museum  on June 23 this year, museum founder Tod Swormstedt achieved one of his dreams. As I walked past the brightly lit exhibits, I thought about what Napoleon Hill, author of Think and Grow Rich, had said: what a man can conceive of and […] Read more »

Thermal Transfer Printing on VinylEfx® Films

One unique characteristic of our VinylEfx® product is the deep embossing, which creates the 3D illusion in patterns, such as MultiLens® and Diamond Plate™. Deeply embossed patterns, however, can cause problems, when printing with thermal transfer systems, such as the Gerber Edge®. Printing on films, which are not perfectly smooth, can result in flaking, in […] Read more »

Painting Expanded PVC Panels

For less demanding applications expanded PVC (EPVC) board  is a good alternative for  short-term outdoor signage, indoor retail signage, P.O.P displays, tradeshow and museum exhibits and for mounting photographs and digital prints. Some of the popular brands that are stocked by sign supply distributors are Sintra®, Celtec, Komatex and Veracel. Available in different densities and finishes and in […] Read more »