Printing with Solvent and Ecosolvent Inks
Solvent and ecosolvent inks allow you to print onto various types of uncoated films, including RTape’s VinylEfx® vinyl print media. As wonderful and easy to use as these print systems are, you must test and evaluate the inks and your printer settings prior to production. Incompatibility between the ink system and the print media could […] Read more »
Choosing a Translucent Vinyl
Which is Better for Backlit Signs: Cast or Calendered? Vinyl manufacturers, such as 3M™ and Arlon, produce a broad color selection of translucent cast vinyl films for backlit signage applications. In addition to backlit building signage, other applications include taxi-top signage, mall and airport-terminal advertising, menuboards and canopy fascias. Read more »
Outgassing and Health Concerns
I have received several letters from those who have read my story about outgassing. I certainly did not intend to cause alarm. Plastics outgas (also referred to as off gassing or degassing). The rate at which this outgassing occurs depends on the resin type, time, temperature and atmospherics. The good news is that outgassing of a […] Read more »
More on What You Need to Know About Rivets
Discover the ins and outs, dos and don’ts of installing vinyl graphics over rivets. What you find out may surprise you. Dealing with rivets is the price you pay for greater profits. But applying over rivets need not be a nightmare if you have the right knowledge and skills. Read more »
Should You Buy Ink in Bulk?
Discover the pros and cons of buying ink in large quantities. Want to save money on your ink budget? Barring using third-party inks, you have two options: buy in bulk or install a bulk ink system. Read more »
Application of Vinyl Graphics to Acrylic Signs
When decorating acrylic sheet, selecting the right vinyl film for the job depends on a variety of factors: Read more »
How to Flash Press FlexCut™ Sticky LT
Heat Transfer Tip Saves Time & Money RTape has a new heat transfer solution that saves time and money. Here’s how. When decorating a heat sensitive fabric, RTape’s FlexCut™ Sticky LT (low temperature) is typically heat pressed at 235°F (115°C) for 17 seconds Read more »
Sign Media & Floor Graphics
In Sign Media Canada , Jodie Sawyer of Flexcon writes: “Floor graphics have been used in the retail sector for years to help shoppers find products on shelves or to direct their attention to special merchandising promotions. Studies have shown they typically result in a seven to 16 per cent sales lift. Read more »
Using SuperFrog’s Frog Juice
For years I have recommended edge sealing the RTape VinylEfx® films with SuperFrog’s Frog Juice, which is an acrylic enamel automotive grade clear coat. While it is great for protecting vinyl graphics, you can also use it for other applications, such as clear coating digital prints and even gold leaf. Read more »
