Years ago professional decal installers were taught to install vinyl graphics in a relaxed state without stretching the film. While vinyl films today are much more robust and can withstand the stresses encountered when wrapping a vehicle, you are much less likely to experience film failure, if you adhere to some of the old rules. […] Read more »
Application Temperature Range
To avoid problems with vinyl or any other pressure-sensitive material, carefully read the vinyl manufacturer’s technical data sheet. Product bulletins will usually contain all of the information you need, including application temperature range. The application temperature range for most vinyl films is usually between 50⁰ and 90⁰F (10⁰ to 32⁰ C). For some films, the […] Read more »
Problems with Static Electricity
In much of the country September ushers in climatic changes. As the autumn air becomes colder, the humidity of the air outdoors decreases. The drop in humidity can result in an increase of problems related with static electricity. Static problems in print shops are further exacerbated, as we switch from air conditioning to a heating […] Read more »
Premask Puckering on Screen Printed Graphics
A number of factors can cause puckering and tunneling of a premask or application tape laminated on a screen printed vinyl graphic. These factors fall into three broad categories: environment, material processing and product selection. Read more »
The Effect of Clear Coating Matte Silver VinylEfx Film
Spraying RTape Matte Silver VinylEfx® film with a clear coat will change its appearance from a matte finish to a satiny finish. The reason for the change is that this VinylEfx® pattern is textured on the first or outside surface of the film. Other VinylEfx® patterns are embossed on the second surface. When you spray […] Read more »
Introducing Tatoo Printable Heat Transfer Films
RTape Corp. (South Plainfield, NJ) introduces its SEF Tatoo heat transfer film, which is a white, printable, multi-layer polyurethane construction on a polyester liner or carrier. Tatoo films are printable using a wide range of digital printers, including solvent, ecosolvent and latex systems. The brilliance of the facestock and its chemical formulation allow for vibrant […] Read more »
Adhesion Testing
Testing the Bond of an Ink or Paint Whether you are screen printing or painting, the coating must bond to the substrate for the service life of the product. Depending on the physical properties of the coating that you have selected for a project and the substrate to which the coating will be applied, the […] Read more »
New Mexico Neon on Route 66
Sign makers are getting their kicks restoring vintage neon signs along New Mexico’s portion of Route 66. Brightly-lit sombreros and teepees are entertaining youngsters who are anxious to arrive at their destinations. And many other characters and critters that personify Route 66 are once again being lit up with pride. Read more »
Water Size Recipe for Glass Gilding
In glass gilding, a water size is the glue that adheres gold leaf to the glass. Made of water-clear gelatin and distilled water, it is essential for creating a brilliant gold mirror finish. Of course, you can also apply gold to glass with oil size, if you want areas of a design to have a […] Read more »
Why Photoluminescent Films Glow In The Dark
Have you ever wondered why photoluminescent films, such as RTape’s GlowEfx™, emit a bright greenish glow when the lights go out? The pigments in photoluminescent films as well as in fluorescent films work very differently than other types of pigments. Read more »
