Learn How You Should Prep Galvanized Steel and Rusted Surfaces Prior to Painting. Read more »
Supply55, Inc. announces the release of UV-PRO an Ocè IJC256 compatible ink for Arizona printers
Supply55, Inc. is pleased to announce the release of UV-PRO an Ocè IJC256 compatible ink for use with Ocè Arizona printers. UV-PRO ink from Supply55 is specially formulated to meet or exceed the performance specifications of Ocè IJC256; provides superior adhesion, is fully color matched and is plug-n-play compatible making conversion a snap. PRINTER COMPATIBILITY: […] Read more »
Wall to Wall Graphics Application
Learn the basics about wall graphics application, including site survey, material selection, wall painting, surface preparation and vinyl application techniques. By Jim Hingst @hingst_jim For retailers, getting shoppers through the front door is part of the battle. The next challenge is keeping them there. According to industry studies, within 10 seconds of walking through the […] Read more »
Overlaminate Selection for Vehicle Wraps
In selecting an overlaminate for vinyl graphics, the general rule of thumb is: use a cast vinyl overlaminate for cast vinyl graphics; use either a calendered or cast overlaminate for calendered vinyl graphics. Calendered vinyl, is not appropriate for a curved surface, especially one with as many curves as the bumper on a car. The […] Read more »
Selecting the Right Screen Print Fabric
Selecting the Right Screen Print Fabric This article provides recommendations in selecting mesh for screen printing signage and large format graphics. By Jim Hingst @hingst_jim One of the most important aspects of screen printing is selecting the right screen print fabric for the job. The screen print fabric serves two key functions. First, it supports […] Read more »
Why Use an Overlaminate?
There are three primary reasons to use an overlaminate for large format graphics. These are to beautify and protect the printed graphic and, when used for floor graphics, to provide slip resistance. Read more »
Picking The Right Application Tape Tack Level
The tack level of an application tape describes the stickiness of the adhesive. Most sign makers use a standard grade application tape with a high tack adhesive, such as RTape ApliTape™ 4075 or Conform® 4075RLA. Read more »
Pinstriping Tips from Tramp Warner
For more than 40 years, John “Tramp” Warner has been painting cartoons and pinstriping. In 2008, his dedication to his craft was recognized by his peers, when he was presented with the lifetime achievement award at the Milwaukee Pinstripe Legend charity event. Read more »
How to Leverage Color Management to Make Your Signage Pop
How to Leverage Color Management to Make Your Signage Pop Being off by just a shade, quite literally, can cost you one or both of these objectives. For this reason, great designs demand to be paired with great color management to help ensure they get the job done.By John Fulena, Vice President, Ricoh PPBG Group At […] Read more »
Surface Prep for Glass Gilding
Learn how to properly prep a window before gilding. By following the techniques in this story you will achieve good adhesion of gold leaf to glass… Read more »
